Type-II Bi2O2Se/MoTe2 van der Waals Heterostructure Photodetectors with High Gate-Modulation Photovoltaic Performance.

In recent years, two-dimensional (2D) nonlayered Bi2O2Se-based electronics and optoelectronics have drawn enormous attention owing to their high electron mobility, facile synthetic process, stability to the atmosphere, and moderate narrow band gaps. However, 2D Bi2O2Se-based photodetectors typically present large dark current, relatively slow response speed, and persistent photoconductivity effect, limiting further improvement in fast-response imaging sensors and low-consumption broadband detection. Herein, a Bi2O2Se/2H-MoTe2 van der Waals (vdWs) heterostructure obtained from the chemical vapor deposition (CVD) approach and vertical stacking is reported. The proposed type-II staggered band alignment desirable for suppression of dark current and separation of photoinduced carriers is confirmed by density functional theory (DFT) calculations, accompanied by strong interlayer coupling and efficient built-in potential at the junction. Consequently, a stable visible (405 nm) to near-infrared (1310 nm) response capability, a self-driven prominent responsivity (R) of 1.24 A·W-1, and a high specific detectivity (D*) of 3.73 × 1011 Jones under 405 nm are achieved. In particular, R, D*, fill factor, and photoelectrical conversion efficiency (PCE) can be enhanced to 4.96 A·W-1, 3.84 × 1012 Jones, 0.52, and 7.21% at Vg = -60 V through a large band offset originated from the n+-p junction. It is suggested that the present vdWs heterostructure is a promising candidate for logical integrated circuits, image sensors, and low-power consumption detection.

Polarization-Resolved p-Se/n-WS2 Heterojunctions toward Application in Microcomputer System as Multivalued Signal Trigger.

Polarization-sensitive photodetectors based on van der Waals heterojunctions (vdWH) have excellent polarization-resolved optoelectronic properties that can enable the applications in polarized light identification and imaging. With the development of optical microcomputer control systems (OMCS), it is crucial and energy efficient to adopt the self-powered and polarization-resolved signal-generators to optimize the circuit design of OMCS. In this work, the selenium (Se) flakes with in-plane anisotropy and p-type character are grown and incorporated with n-type tungsten disulfide (WS2 ) to construct the type-II vdWH for polarization-sensitive and self-powered photodetectors. Under 405 nm monochrome laser with 1.33 mW cm-2 power density, the photovoltaic device exhibits superior photodetection performance with the photoelectric conversion efficiency (PCE) of 3.6%, the responsivity (R) of 196 mA W-1 and the external quantum efficiency (EQE) of about 60%. The strong in-plane anisotropy of Se crystal structure gives rise to the capability of polarized light detection with anisotropic photocurrent ratio of ≈2.2 under the 405 nm laser (13.71 mW cm-2 ). Benefiting from the well polarization-sensitive and photovoltaic properties, the p-Se/n-WS2 vdWH is successfully applied in the OMCS as multivalued signal trigger. This work develops the new anisotropic vdWH and demonstrates its feasibility for applications in logic circuits and control systems.

Multifunctional GeAs/WS2 Heterojunctions for Highly Polarization-Sensitive Photodetectors in the Short-Wave Infrared Range.

Polarization-sensitive photodetectors in the infrared range have attracted considerable attention because of their unique and wide application prospects in polarization sensors and remote sensing. However, it is challenging to achieve short-wave infrared polarization detection as most polarization-sensitive photodetectors are based on transition-metal dichalcogenide (TMD) materials with in-plane symmetric crystal structure and sizable band gap (1-2 eV). In this work, we design a type-II GeAs/WS2 heterojunction realizing superior self-driven polarization-sensitive photodetection in the short-wave infrared region. The device shows obvious rectifying behavior with a rectification ratio of 1.5 × 104 in the dark and excellent photoresponse characteristics in a broad spectral range. Accordingly, the high responsivity of 509 mA/W, large on/off ratio of 103, a high EQE of 99.8%, and a high specific detectivity of 1.08 × 1012 Jones are obtained under 635 nm laser irradiation. Taking advantage of the narrow band gap of GeAs with an anisotropic structure, the detection spectral coverage can be extended from the visible to the short-wave infrared range (635-1550 nm). Further, the GeAs/WS2 heterojunction shows high polarization sensitivity with an anisotropic photocurrent ratio of 4.5 and 3.1 at zero bias under 1310 and 1550 nm laser irradiation, respectively, which is much higher than that of reported polarization-sensitive photodetectors in the infrared region. This work provides an effective route using low-symmetry 2D materials with narrow band gap and anisotropic structure to design van der Waals (vdW) heterojunctions, realizing multifunctional optoelectronics for rectifying, photovoltaics, and polarization-sensitive photodetectors with spectral coverage up to 1550 nm.

Vertically stacked Bi2Se3/MoTe2 heterostructure with large band offsets for nanoelectronics.

In recent years, two-dimensional material-based tunneling heterojunctions are emerging as a multi-functional architecture for logic circuits and photodetection owing to the flexible stacking, optical sensitivity, tunable detection band, and highly controllable conductivity behaviors. However, the existing structures are mainly focused on transition or post-transition metal chalcogenides and have been rarely investigated as topological insulator (such as Bi2Se3 or Bi2Te3)-based tunneling heterostructures. Meanwhile, it is challenging to mechanically exfoliate the topological insulator thin nanoflakes because of the strong layer-by-layer interaction with shorter interlayer spacing. Herein, we report Au-assisted exfoliation and non-destructive transfer method to fabricate large-scale Bi2Se3 thin nanosheets. Furthermore, a novel broken-gap tunneling heterostructure is designed by combing 2H-MoTe2 and Bi2Se3via the dry-transfer method. Thanks to the realized band alignment, this ambipolar-n device shows a clear rectifying behavior at Vds of 1 V. A built-in potential exceeding ∼0.7 eV is verified owing to the large band offsets by comparing the numerical solution of Poisson's equation and the experimental data. Carrier transport is governed by the majority carrier including thermionic emission and the tunneling process through the barrier height. At last, the device shows an ultralow dark current of ∼0.2 pA and a superior optoelectrical performance of Ilight/Idark ratio ≈106, a fast response time of 21 ms, and a specific detectivity of 7.2 × 1011 Jones for a visible light of 405 nm under zero-bias. Our work demonstrates a new universal method to fabricate a topological insulator and paves a new strategy for the construction of novel van der Waals tunneling structures.